Recombinase polymerase amplification: characterization and mitigation of undescribed multimeric artefacts

Recombinase polymerase amplification (RPA) enables rapid nucleic acid testing in low-resource environments, but poorly characterized byproducts can compromise assay specificity and cause false-positive results. Here, we amplified the thirteen original CODIS core loci and Amelogenin to characterize recurrent RPA artefacts and establish conditions that reduce their formation. First, RPA products were analyzed for two reference samples by Oxford Nanopore Technologies sequencing. This revealed two distinct classes of multimeric products: primer multimers and amplicon multimers, consisting of repeated primer or amplicon sequences, respectively. Individual artefacts contained up to 281 primer copies or 22 amplicon copies, demonstrating the extensive range of these products. Next, we performed an optimization study to evaluate the effects of reaction temperature and reagent concentrations at two representative loci, D3S1358 and D5S818. Among the conditions tested, temperature had the most pronounced effect. Reducing the temperature from 42{degrees}C to 34{degrees}C increased the relative target amplicon fraction from 15% to 83% for D3S1358 and from 84% to 98% for D5S818, while maintaining or increasing absolute target concentration. Lower primer concentrations and higher T4 UvsX concentrations also reduced multimer formation, although lower primer concentrations reduced target yield and caused allelic dropout. Finally, amplification at 34{degrees}C was evaluated across all fourteen loci by sequencing. Relative to 42{degrees}C, the target read fraction increased by more than 5 percentage points for 7/14 loci in one reference sample and 9/14 loci in the other, with the largest improvements at multimer-prone loci. These findings identify multimers as an important class of RPA artefacts and establish reaction temperature and T4 UvsX concentration as promising conditions to improve RPA specificity.