A Wirelessly Powered Implantable CMOS Neural Recording Sensor Array using Pulse-based Neural Amplifier

The most important organ in the human body is unquestionably the brain. Yet, despite its importance, it is one of the least well understood organs. One reason for this lack of understanding of the brain is the lack of data available to researchers from in vivo studies. Historically, collecting measurements from the brain has been difficult due to the high risk to the patient. Recently technology has been developed to allow electrical measurements to be taken from the brain directly, however most systems involve non-permanent sensors because of the requirement for transcranial wiring for power and data. Developments in the field of CMOS circuit design, wireless power transmission, and wireless data transmission have enabled the creation of implantable neural recording devices as a combination of these technologies. The implant designed in this paper is [~]15 mm in diameter and 2 mm at its thickest point on a flexible polyamide PCB. The flexible nature of the implant allows for the implant to conform to the surface of the brain. The implant requires no transcranial orifice since it is powered wirelessly and transmits data wirelessly via Bluetooth low energy. The CMOS neural amplifier chip on the implant utilizes an enhanced form of delta modulation to remove the requirement for large ADCs to be present on the die, saving space and enabling 1024 amplifiers and electrodes to be present on the chip. The implant is capable of measuring, modulating, and wirelessly transmitting a millivolt order signal to a PC for demodulation and analysis.