Biomechanical Modeling of a Bone Tunnel Enlargement Post ACL Reconstruction

BackgroundBone tunnel enlargement is considered as a potential problem following ACL reconstruction and can cause a fixation failure and complicate its revision surgery. This study evaluates post tibial tunnel expansion in ACL reconstruction using an interference screw. MethodsA series of in-vitro experimental tests on animal bone and tissues were used to simulate post ACL reconstruction. The study believes an unbalanced lateral force can cause a local enlargement on the contact zone inside the tunnel. Grayscale X-ray images were used to assess the screw alignment inside the tunnel. ResultsThey showed a slight misalignment between the screw and the tunnel axis as the tendon strands moved along the side of the tunnel, and the screw had partial contact with the tendon and bone along the tunnel. According to the results, increased stress in the tunnel wall causes tunnel enlargement. Although the tunnel created away from the tibial central axis produced a higher strength, it results in higher stress on the wall of the tunnel which can increase the risk of tunnel expansion. ConclusionsThe current study believes the use of an unguided interference screw insertion potentially increases risks of the misaligned fixation and cause a tunnel enlargement. This risk may be controlled by restricting the post-operative rehabilitation.